3. When sliding during treatment, appropriate pressure should be applied to
the laser handle to keep the handle in good contact with the skin. It can also
drive local blood and reduce oxyhemoglobin absorption of laser energy.
4. When the frequency is high, the speed control is in place and cannot be
stopped
5. After the treatment is completed, the probe can leave the skin after the
handle energy is turned off, to avoid over-scalding of the epidermis
6. During treatment, the probe should subsidize the skin to avoid over-
scalding of the epidermis
7. It is normal to feel hot pain in the pigmented area of the epidermis during
treatment
8. Protect hair in non-treated areas
9. The continuous working time of the instrument is too long, it should be
properly shut down for a few minutes before use.
10. If photosensitivity occurs, stop the treatment immediately to avoid
scratching your hands
11. During treatment, the skin appears severe redness, apply scald cream
treatment, mild redness with cold compress
12. People with darker skin may experience delayed skin reactions, and they
should not increase energy because of the lack of obvious reaction.
Ⅵ、
Postoperative matters needing attention
1. Avoid overheating hot water bath within 7 days after hair removal,
suitable for warm water.
