Follow the steps below to complete the installation
：
Unpack the device
Check the equipment and all accessories for damage
First install the handle hanger, then install the handle, and then add water
Turn off the nut of Water injection hole, insert the water funnel into the
Water injection hole and add distilled water or pure water (it is
recommended to add frozen water in summer), if it is added to the
overflow, there is water overflow, indicating that the water tank is full
Unscrew the overflow nut before adding water, pull out the funnel after
filling, and do not cover the filling nut. Keep the air flow of the water tank
smooth
Plug the power cord into the corresponding power socket
Check all the steps to ensure correct connection, and then turn on
Environmental and input power requirements
Input voltage: 220V/50Hz, 110V/60Hz
Corrosive substances can damage electrical components, so use the
device in a non-corrosive environment
Metal dust can damage electrical components, and particulate dust
absorbs light and heat. Therefore, particulate dust should be reduced to
a minimum
In order to achieve the best equipment use effect, the room temperature should be
