04
03
About Your Grinder
Safety Decal Locations
Safety Decals
Machine Component Identification
4
5
6
7
Summary of Important Safety Information
Special Safety Information on Static Electricity
Part I. Introduction
Part II. Operation
Part III. Maintenance and Repair
Part IV: Important Safety Information
Parts Explosion
Warranty
21
25
29
31
Operation:
1. Pre-Start Check List & Procedures
2. Starting the Grinder
3. Stopping the Engine
4. Grinding the Stump
5. Refueling
6. Storing the Machine
8
10
11
11
13
14
Maintenance
(To be done by owner or Rental Dealer)
1. Belt Tension Adjustment
2.Stop-Switch Adjustment
3. Installing Teeth
4. Schedule
Specifications
16
17
18
19
19
20
Read and follow all instructions and safety precautions presented throughout this manual. A summary
of important safety information can be found at the end of the manual. Keep this manual for reference
and review. If the owner of this unit is different than the operator, give a copy of this manual to any
operator to read.
Owner/Operator/Renter Training
All persons to whom you rent/loan this grinder must have access to this manual and read it. Check the
tube on the side of the unit to make sure a manual is inside. Advise all persons who will operate the
machine to read it. You should also provide personal instruction on how to safely operate the grinder
and remain available to answer any questions a renter/borrower might have. If videos are available,
have renter watch training video.
Your stump grinder can be used to remove many tree stumps and exposed root systems close to
ground level. By moving the blade in sweeping movements laterally over the top and front of the
stump, you can gradually grind it away. Make sure you completely read and understand this manual
before using the grinder for the first time. If you have any question, contact your retail or rental dealer
or manufacturer.
Exercise caution when cutting stumps on an incline, as the machine may shift or slide unpredictably.
Never attempt to cut with the machine uphill or downhill from you as it may slide toward you or you
may fall toward the machine. Cut only on a slope from the side.
The supplier is constantly improving its products. The specifications outlined herein are subject to
change without prior notice or obligation. The purchaser and/or user shall assume liability for any
modification and/or alterations of this equipment from original design and manufacturer.
Rental Companies
For detailed engine operation and maintenance information, always refer to the engine4 Owner's
Manual furnished with the grinder.
WARNING:
Never attempt to cut an a slope exceeding 15°
Engine Instructions
Please fill out and submit the warranty registration card so that we have your contact information for
any future product literature or replacement parts you may need.
Warranty Registration
Before using, the user shall determine the suitability of this product for this intended use and assumes
liability therein.
Product Suitability
ABOUT YOUR GRINDER
TABLE OF CONTENTS
Содержание SGR1500
Страница 1: ......
