MTI SGR1500 Скачать руководство пользователя страница 17

31

32

Dear Valued Customer:

The stump grinder you just purchased is built with the finest material and craftsmanship. Use this 
product properly and enjoy the benefits from its high performance. By purchasing our product, you 
show a desire for quality and durability. Like all mechanical equipment this unit requires a due 
amount of care. Treat this unit like the high quality piece of machinery it is. Neglect and improper 
handling may impair its performance.

Thoroughly read the instructions and understand the operation before using your product. Always 
contact our Product Support prior to having any service or warranty work performed, as some 
services performed by parties other than our approved service centers may void this warranty. This 
limited warranty is in lieu of any other warranty expressed or implied, written or oral and we assumes 
no other responsibility or liability outside that expressed within this limited warranty.

In addition to the normal warranty, we shall warrant some normal wear items 
from defects in material or workmanship for a period of 30 days from the date of 
purchase by user. Normal wear items covered under this warranty are limited to: 
tires, belts, grease zerks, bearings, teeth, bolts, clutches, switches, wires, cables. 
Routine maintenance items such as lubricants, clutch adjustments, tune ups are 
not covered under warranty.

The engine warranty is covered under the terms and conditions as outlined by 
the engine manufactures warranty contained herein and is the sole responsibility 
of the engine manufacturer. Normal engine maintenance such as spark plugs, oil 
changes, air filters, adjustments, fuel system cleaning and obstruction due to 
build up is not covered by our limited warranty.

2 years from date of purchase by user

2 years from date of purchase by user

Consumer use

” means personal residential household use by a consumer. “Commercial use” 

means all other uses, including, but not limited to, use for commercial, income producing or rental 
purposes or when purchased by a business.
This limited warranty applies to the original purchaser of the equipment (verification of purchase, in 
the form of a receipt, is the responsibility of the buyer), is non-transferable, and covers parts and 
labor. Parts will be replaced or repaired at no charge, except when the equipment has failed due to 
lack of proper maintenance. If a part is no longer available, the part may be replaced with a similar 
part of equal function. Any misuse, abuse, alteration or improper installation or operations will void 
warranty. Determining whether a part is to be replaced or repaired is the sole decision of ours. We will 
not provide for replacement of complete products due to defective parts. Any costs incurred due to 
replacement or repair of items outside of a ours approved facility is the responsibility of the buyer and 
not covered under warranty. Transportation costs to and from service center and/or service calls are 
the responsibility of the customer.

This limited warranty specifically excludes the following; failure of parts due to damage caused by 
accident, fire, flood, windstorm, acts of God, applications not approved by our in writing, corrosion 
caused by chemicals, use of replacement parts which do not conform to manufacturer’s specifications, 
damage related to rodent and/or insect infestation and damage caused by vandalism. Additional 
exclusions: loss of running time, inconvenience, loss of income, or loss of use, including any implied 
warranty of merchantability of fitness for a specific use.
Also, outdoor power equipment needs periodic parts and service to perform well, and this limited 
warranty does not cover instances when normal use has exhausted the life of a component or the 
engine.

This limited warranty does not cover any personal injury or damage to surrounding property caused 
by failure of any part, misuse or inability to use the product. Alteration of the product, including 
safety features, shall void this limited warranty.

Repair or replacement of parts does not extend the warranty period. This limited warranty gives you 
specific legal rights. You may also have other rights that vary by state.

Please have model number, item number and serial number on hand prior to making a warranty claim 
or inquiry.

Limited Warranty Policy

Consumer Warranty Period

Commercial Warranty Period

Weldments

Wear Parts

Engine

Содержание SGR1500


















Отзывы: