FREEDOM CORE II
™ POWER/SCREAMER SENSOR
7
MTI P/N 063-00229 rev A ©2018 MTI All Rights Reserved
www.mobiletechinc.com | T:800.426.6844
1
3
5
2
4
6
Hold the Adhesive Pad Removal Tool with both hands
and using a sawing motion, pull one side of the tool,
then the other back and forth until the VHB is released
from the base plate. Remove excess VHB by rolling it
off the surface.
Clean the Power Screamer with an alcohol swab and
let air dry or wipe dry with a clean cloth. Replace VHB
with extra pads provided.
Insert IntelliKey into Power Screamer port until LED
turns green.
Turning clockwise, twist off the Power Screamer from
the base plate.
Using the Double-Sided System Tool, turn clockwise.
Remove the GeniusCable.
REMERCHANDISING THE SENSOR
-CONTROLLED DOCUMENT-
063-00229
A-0
Status: Approved
ECO-106737
ECO-106737
