Alarm Output
The alarm output of the DCQ-2000 goes true whenever
there is an internal VLoss alarm or external Alarm Input that
has been true. This Alarm Output stays true for the length of
the alarm dwell that has been programmed by the user. The
alarm output is a Form C contact. There is a NO (Normally
Open), a NC (Normally Closed) and a Common output.
The rating of the internal relay is:
AC 120V/240V @ 1A or DC 30V @ 1A.
PAL / NTSC
The DCQ-2000 is factory configured for the PAL format.
However the DCQ-2000 can operate in the NTSC format.
This requires the changing of the internal jumpers only.
Please refer to an AVE approved service technician for
converting the DCQ-2000 to NTSC format. There is a total
for 4 jumpers.
Jumpers
17
