very low chroma level, it must set to “Fix” to disable the
autoremover. This usually happens with a very long cable
connection between the camera and the Quad if no frequency
compensation is used. The limitation of the length will depend
on the specification of the cable.
Bri: This adjusts the brightness of the selected camera.
Con: This adjusts the contrast of the selected camera.
Sat: This adjusts the color saturation or amount of color of the
selected camera.
Hue: This adjusts the hue or tint of the selected camera.
Alarm: There are three parts to this item;
1st selection is to set the type of external alarm equip-
ment. This is NO (Normally Open) or NC (Normally Closed)
types of contacts.
2nd is to select the status detected by this unit in the
power-on initialization. This is either Open or Close.
3rd is to enable or disable the Alarm trigger of this chan-
nel or camera. (On or Off)
3rd OSD Menu
13
