manualshive.com logo in svg

MTI 829, Руководство пользователя

Поделиться
Скачать
MTI 829 Скачать руководство пользователя страница 24

User Manual  |  

MTI 830 & 829

20

MODE INDICATOR: Each locking bar has a mode indicator line 
on the center of the pedal that points to the adjacent indicator 
label on the base of the chair. Note that the (3) Total Lock 
Casters operate the same whether they are in FREE or STEER 

Mode.

MODE INDICATOR

LOCK MODE: This mode is used to prevent movement of the 
chair. When both pedals are in the LOCK position; all (4) casters 
will not roll or swivel.

LOCK

LOCK

LOCK MODE

FREE MODE: This mode is used when you need to pull the 
chair away from an object in a perpendicular direction or turn 
the chair with a zero radius. When both pedals are in the FREE 
position; all (4) casters will roll and swivel freely.

FREE

FREE

FREE MODE

STEERING MODE: This mode is used for transport as the 
Steering Caster acts as a steering wheel to aid in easy transport. 
When the patient’s left-hand pedal is in the STEER position and 
the patient’s right-hand pedal is in the FREE or STEER position; 
the (3) Total Lock Casters will roll and swivel freely and the (1) 
Steering Caster will roll but will not swivel.

 NOTICE/AVIS

Orient the steering caster opposite the direction of travel to prevent 
the casters from wobbling. 
Orientez la roulette de direction opposée à la direction de voyage 
pour éviter le tremblement des roulettes.

FREE

STEER

STEER MODE

Содержание 829









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды