MTI 829, Руководство пользователя

Страница: 33 / 40

29
GUIDE TO INDICATOR LIGHTS AND SOUNDS
#
LIGHTS
SOUND STATUS OR CONDITION
GREEN BLUE ORANGE
1 Solid Off Off
Start Up Tune Chair has been plugged in.
2 Slow Flash Off Off
None Chair is in hibernation state to conserve power. To
exit hibernation press any button.
3 Solid
Rapid
Flash
Off
None Chair is moving to the Programmed Home or a
Program Position or manual button (Lift Up/Down,
Tilt Up/Down, Back Up/Down, Foot Up/Down, or
Foot In/Out) is being pressed.
4 Solid
Rapid
Flash
Rapid
Flash
None Chair is moving to the ADA Compliant Home
position.
5 Solid Off Off
High Beep when a
Program Button is
pressed
No Program Position is saved.
6 Solid
Flash
Twice
Off
High-Low-High Tune Program Position or Programmed Home Position
has been saved.
7 Solid Off
Mod. Flash
for 10 sec.
High Beep during motion
of specific actuator
Actuator/motor Problem (Contact Customer
Service).
8 Solid Off
Flash
Twice
High Beep Chair has been moved to a Safe Zone boundary.
(ex. Excessive Trendelenburg or Footrest near Seat
Cushion or floor). Move in opposite direction to
resume full functionality.
9 Solid Off
Flash
Twice
High Beep Excessive load on a motor. Remove or shift
excess load and move in the opposite direction
momentarily to resume.
Actuator/motor reaches end of stroke
prematurely. NOTE: If beeping occurs frequently,
contact Customer Service.
10 Solid Off
Rapid
Flash
None Swivel has been unlocked. NOTE: On a Non-Swivel
model, the orange LED will still flash when the
swivel button is pressed. Press any button to turn
it off.
11 Solid Off Solid
2 High Beeps (upon
activation)
Safety Lockout feature is enabled. (To exit press
Stop, Stop, Back Down, Stop) Orange LED will flash
twice each time button is pressed while Safety
Lockout feature is enabled.
12 Solid Off Slow Flash High Beep with every
button press
No actuators respond to motion commands. Chair
ID Mismatch (Contact Customer Service).
13
Mod.
Flash
Mod.
Flash
Mod.
Flash
High Beep with every
button press
No actuators respond to motion commands. Chair
ID Cable Invalid (Contact Customer Service).
14 Off Off Off
None Loss of power (chair was unplugged).
15 Off Off Off
Shut Down Tune Chair has been powered off. Press power button
on hand control to resume operation.