MTI 526, Руководство пользователя

Страница: 17 / 28

User Manual | MTI 527, 527W, &526 13
Method 1: Auto engage mode is a swivel mode which will unlock the swivel for 6 seconds and automatically engage
the lock after 6 seconds.
1. Press the swivel button on the control and release it within two seconds.
2. Swivel enters swivel mode for 6 seconds.
3. Swivel the chair to the desired location.
4. After 6 seconds the swivel lock will automatically engage.
• If the chair is in swivel mode and the swivel button is pressed again, the swivel lock immediately engages.
• If the chair is in swivel mode and any other command button is pressed, the swivel lock immediately engages.
Method 2: Press and hold mode is a swivel mode where the swivel will unlock as long as you hold down the swivel
button on the control. Once you release the swivel button, the swivel lock will engage.
1. Press and hold swivel button on the control for longer than two seconds.
2. The chair enters swivel mode until the swivel button is released.
3. Swivel the chair to the desired location.
4. The chair stays in swivel mode as long as the swivel button is held down and immediately engages swivel lock
upon button release.
NOTICE/AVIS
The swivel will lock if the swivel is unlocked and another button is pressed.
Le pivot se bloque si le pivot est déverrouillé et un autre bouton est pressé.
NOTICE/AVIS
The swivel will unlock if the chair loses power.
Le pivot va déverrouiller si l’équipement perd son alimentation.
Swivel Base Operation
The swivel base is a factory installed option for the 527 and
527W Model chairs. See also “Controls” on page 10 of this
manual. Swivel mode is the condition when the swivel lock is
unlocked and the chair can swivel freely.
There are two methods to operate the swivel on the 527 and
527W Model chairs. Follow the step(s) below for the desired
method.