Running the engine without a primed
smoke unit may cause damage
Smoke Unit Control
Figure 3:
Add Smoke Fluid
Smoke Unit Control
Adding Smoke Fluid
Figure 2:
Premier SD50 Diesel Engine
4
Configuring Locomotive for 2-Rail or 3-Rail Operation
Your locomotive can be configured to operate on 2-Rail or 3-Rail track. From the
factory the locomotive is configured to operate on 3-Rail Track. To configure the
locomotive for 2-Rail track operation, please do the following:
1. Remove the center rail pickup roller assemblies
2. Change the power input from 3-Rail to 2-Rail as seen in the figure below.
Figure 4: 3-Rail Pickups
3-rail / 2-rail switch
Figure 5: 3-Rail Pickups
3-Rail Pickups