manualshive.com logo in svg

MTHTrains Premier SD50 Diesel Engine, Руководство оператора

Поделиться
Скачать
MTHTrains Premier SD50 Diesel Engine Скачать руководство пользователя страница 13

Automatic Sound Effects

®

Certain Proto-Sound  3.0 sound effects automatically play in programmed conventional 
mode conditions:

• Squealing Brakes play any time the engine's speed decreases rapidly.
• Cab Chatter plays at random intervals when the engine idles in neutral.
• Engine Start-up and Shut-down sounds play when the engine is initially 
 powered on or is powered off  for five seconds or more.

Reset to Factory Default

To override the settings you currently have assigned to the engine and reset it to its 
factory defaults, while in Neutral tap the Horn button quickly once, followed by five 
quick taps of  the Bell button, allowing approximately ½ second to lapse between each 
quick button press. Two horn blasts will indicate that the engine has made the change.

Reset

Two Horn Blasts

(indicates change is made)

Repeat to Return

to Normal Condition

Horn

Place 

Engine in 

Neutral

=

Bell

Bell

Bell

Bell

Bell

Ditch Lights

(

On/Off)

Horn

Place 

Engine in 

Neutral

=

Bell

Bell

Bell

Bell

NOTE

 – The Ditch Lights follow Rule 17 lighting. That means when your engine is 

stopped the ditch lights will go off. Once you start moving again in forward (when the 
headlight goes from dim to bright) they will come back ON, provided you have them 
set to ON.

Premier SD50 Diesel Engine

13

Ditch Lights (On/Off)

By Default your Ditch Lights are set to ON. That means they are ON as soon as the engine 
starts moving in forward. When you sound the horn they will alternately flash and will 
continue to flash for 5 seconds after the horn button has been released. When you set the 
Ditch Lights OFF they will stay off  regardless of  movement or horn sounds. To toggle the 
Ditch Lights, perform the following sequence on your AC transformer below:

Содержание Premier SD50 Diesel Engine
















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды