M.T.H. HO 4-8-4 GS-4/ GS-6 Steam Engine
3
QUICK START GUIDE
Of course, you should read your manual over before running your GS-4/6.
But if you just can’t wait, choose how you want to run below and enjoy!!
Your PS3E+ engine is designed to be run with AC power. However, you can
also use DC power if you prefer. The instructions will only reference AC
power.
I'M A DCC/MOTOROLA OPERATOR….
Step 1: Unpack your GS-4/6 (refer to unpacking instructions on pg 4)…
Step 2: Set the engine on the track …
Step 3: Power up your DCC system…
Step 4: Select engine address 3 and press “F3” to start her up…
Step 5: Turn the throttle and head on down the pike…
I RUN DCS….
Step 1: Unpack your GS-4/6 (refer to unpacking instructions on pg 4)…
Step 2:
Set the engine on the track …
Step 3: Power up your DCS system…
Step 4: Add the engine to your system and start her up…
Step 5: Turn the throttle and move out….
I USE AN AC SUPPLY…
Step 1: Unpack your Engine. (refer to unpacking instruction on pg 4)…
Step 2: Set the engine on the track …
Step 3: Apply increasing
AC
voltage until she starts up and pulls out!