MTD BCR4, Руководство оператора

Страница: 3 / 24

RULES FOR SAFE OPERATION
3
SYMBOL MEANING
WARNING: Failure to obey a safety
warning can result in serious personal
injury to yourself or to others. Always
follow the safety precautions to reduce the
risk of fire and personal injury.
CAUTION: Failure to obey a safety
warning can result in serious personal
injury to yourself or to others. Always
follow the safety precautions to reduce the
risk of fire and personal injury
SYMBOL MEANING
SAFETY ALERT SYMBOL: Indicates danger,
warning or caution. Special attention is
required in order to avoid serious personal
injury. May be used in conjunction with other
symbols or pictographs.
NOTE: Advises you of information or instructions
vital to the operation or maintenance of
the equipment.
DANGER:
Failure to obey a safety
warning will result in serious injury to
yourself or to others. Always follow the
safety precautions to reduce the risk of
fire and personal injury.
• IMPORTANT SAFETY INFORMATION •
The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and their
explanations, deserve your careful attention and understanding. The safety warnings do not by themselves
eliminate any danger. The instructions or warnings they give are not substitutes for proper accident
prevention measures.
READ ALL INSTRUCTIONS
BEFORE OPERATING
• Read the instructions carefully. Be familiar with the
controls and proper use of the unit.
• Do not operate this unit when tired, ill, or under the
influence of alcohol, drugs or medication.
• Children and teens under the age of 15 must not use
the unit, except for teens guided by an adult.
• Inspect the unit before use. Replace damaged parts.
Check for fuel leaks. Make sure all fasteners are in
place and secure. Replace cutting head parts that are
cracked, chipped, or damaged in any way. Make sure
the cutting head is properly installed and securely
fastened. Be sure the cutting head guard is properly
attached, and positioned as recommended. Failure to
so can result in personal injury to the operator and
bystanders, as well as damage to the unit.
• Use only original equipment replacement line. Never
use metal-reinforced line, wire, or rope, etc. These
can break off and become a dangerous projectile.
• Be aware of the risk of injury to the head, hands and feet.
SAFETY WARNINGS FOR PETROL TRIMMERS
WARNING: Petrol (gasoline) is highly flammable and
its vapors can explode if ignited. Take the following
precautions:
• Store fuel only in containers specifically designed
and approved for the storage of such materials.
• Always stop the engine and allow it to cool before
filling the fuel tank. Never remove the cap of the fuel
tank, or add fuel when the engine is hot.
• Pressure can build up in the fuel tank. Loosen the fuel
tank cap slowly to relieve any pressure in the tank.
• Add fuel in a clean, well-ventilated area. Wipe up any
spilled fuel immediately. If fuel has been spilled,
avoid creating a source of ignition or starting the
engine until fuel vapors have dissipated.
• Ensure correct fuel is used. Never operate the unit
without the fuel cap securely in place.
• Move the unit at least 9.1 meters (30 ft.) from the
fueling point before starting the engine. Do not
smoke. Keep sparks and open flames away from the
area while adding fuel or operating the unit.
WHILE OPERATING
• Wear safety glasses or goggles and ear/hearing
protection at all times when operating this unit.
Always wear a face or dust mask if the operation is
dusty.