MTD BCR4, Руководство оператора

Страница: 10 / 24

OIL & FUEL INFORMATION
10
DEFINITION OF BLENDED FUELS
Today's fuels are often a blend of petrol and
oxygenates such as ethanol, methanol or MTBE
(ether). Alcohol-blended fuel absorbs water. As little as
1% water in the fuel can make fuel form acids when
stored. When using alcohol-blended fuel, use fresh
fuel that is less than 60 days old.
Using Blended Fuels
If you choose to use a blended fuel, or if its use is
unavoidable, follow recommended precautions:
• Always use fresh unleaded petrol (gasoline)
• Use the fuel additive STA-BIL® or an equivalent
• Drain tank and run the engine dry before storing
the unit
Using Fuel Additives
The use of fuel additives, such as STA-BIL ® Gas
Stabilizer or an equivalent, will inhibit corrosion and
minimize the formation of gum deposits. Using a fuel
additive can keep fuel from forming harmful deposits
in the carburetor for up to six (6) months. Add 0.8 oz.
(23 ml.) of fuel additive per gallon of fuel according to
the instructions on the container. NEVER add fuel
additives directly to the unit's gas tank.
FUELING UNIT
WARNING : Petrol (gasoline) is extremely
flammable and its vapors can explode if
ignited. To avoid serious personal injury,
always stop the engine and allow it to cool
before filling the fuel tank. Do not smoke
while filling the tank. Keep sparks and open
flames away from the area.
WARNING: Add petrol (
gasoline)
in a clean,
well-ventilated outdoor area. Avoid creating
a source of ignition for spilled fuel.
NOTE: Do not overfill tank.
3. Wipe up any petrol that may have spilled.
4. Reinstall the fuel cap.
WARNING: Never operate the unit without
the fuel cap securely in place.
5. Move the unit at least 9.1 m (30 ft.) from the
fueling source and site before starting the engine.
NOTE: Dispose of the old petrol in accordance to
Federal, State and Local regulations.
1. Remove the fuel cap and.
NOTE: Fill or add fuel to the tank only when the
trimmer is in a horizontal position.
WARNING: Remove fuel cap slowly to avoid
injury from
petrol
spray.
2. Place the spout of the gas container into the fill
hole on the fuel tank and fill. See Figure 5.
FIGURE 5