10
s
ectiOn
4 — a
sseMbly
& i
nstallatiOn
Tighten all of the hardware securing the hitch support at
4.
this time.
Install the bag support assembly onto the mounting
5.
assembly on the tractor by hooking it over the cross
mounting bracket outside of the two tabs. See Fig. 4-9.
Secure the bag support assembly to the mounting
6.
assembly using a hex bolt (710-3008) and flange lock nut
(712-04063) provided in hardware pack 689-00087.
See Fig. 4-10.
Note:
On tractors with 42” decks the support assembly
mounts in the center hole as seen above in Fig. 4-10. On
tractors with 46” decks, the support assembly mounts in
the right hand hole as seen in Fig. 4-11.
Mount Assembly on Tractor
Install the mounting assembly on the tractor as follows:
Place the hooked ends of the bagger mounting assembly
1.
over the shoulder bolts, as in Fig. 4-7, on the tractor and
line up the hitch support hole on the mounting assembly
with the hole on the tractor’s hitch.
Install the clevis pin (711-0309A) from hardware pack 689-
2.
00087 into the tractor’s hitch and the assembly’s hitch support
and secure with a hairpin clip (714-0117). See Fig. 4-8.
Note:
The clevis pin can be fed down through the hitch
support and secured, using the hole closest to the head,
underneath with the hairpin clip, or it may be easier to feed
the clevis pin up through the hitch plate hole and secure
with the hairpin clip on the topside. The latter method
may be preferred since it can be easier to insert the hairpin
clip. Either way will work, the decision should be based on
operator preference.
3.
Tabs
Top View
42” Decks
Figure 4-9
Figure 4-10
Align hole on bracket
with hole on tractor
Figure 4-7
Figure 4-8
Содержание 19A30003000
Страница 18: ...Notes 18...
Страница 19: ...19...
