MT Logic LE-207784MT, Инструкция по эксплуатации

Страница: 71 / 124

Connection steps
* Make sure that the power of the LED-TV is off;
* Connect an antenna cable (CATV) to the corresponding interface connector
(75 Ω ANT) on the back of the LED-TV. Connect the other end of the antenna cable to
the antenna connector on the wall or on your digital cable / satellite receiver.
Now you are able to view regular cable TV;
* Turn on the power of the LED-TV;
* Press the SOURCE
button to set the video input mode of the LED-TV to “ATV” or “DTV”
mode. The channel number appears in the top right side of the screen;
* When channels are not programmed a blue screen will appear with go around
grey screen with the text “NO SIGNAL’’.
On the LED MENU you can read how the channels can be programmed
(auto search or manual search).
It is recommended first to let the channels automatically to be searched.
* You can use key CH + / CH- button or the number keys on the remote control to
select the channel you want to watch;
(D) Connect with SCART signal
1. Scart input.
2. DC 12V power input.
Connection steps:
* Read the user guide supplied with your AV devices and ensure that it has a scart
connector;
* Make sure that the power of the LED-TV is off;
* Connect a SCART cable to the corresponding interface connector on the back of the
LED-TV;
* Turn on the power of the LED-TV;
* Press the SOURCE button to set the video input mode of the LED-TV to “SCART” mode;
E 8
2 1
DC IN USB HDMI1 HDMI2 SCART PC AUDIO VGA
COAX
YPbPr
CVBS
R
L
RF IN
CI SLOT