MSV PlayTec, Руководство по эксплуатации, Страница: 6 / 20

6
With the Frequency button you can set the intervals with which the balls are thrown.
The Topspin and Back Spin (Slice) keys are pressed when you want to play the
following ball throws with spin. You can determine the strength of the spin yourself.
Fixed Point in the center marked by an (F). It also acts as a reset button and is
always pressed when a new setting is to be selected.
•
Right Fixed Point, to the right of the (F) is the arrow key.
•
Left Fixed Point, to the left of the (F) the arrow key
•
Up Fixed Point, above the (F) the arrow key
•
Down Fixed Point, below the (F) the arrow key
With these arrow keys you can set the throwing direction of the balls. The left number
in the display e.g. 10 shows the throwing direction horizontally. You can reach the
number 10 by pressing the left arrow key as far as it will go. If you press the right
arrow key, the two throwing wheels will move to the right. If you press the right arrow
key as far as it will go, a 70 will appear on the display, i.e. the throwing wheels will not
move any further to the right when you look at them from the front. So you can set
the horizontal degree step by step by yourself. The middle arrow keys (up and down)
are responsible for the middle number. With these keys you can set e.g. a LOB. On
the diagram you can see which settings are chosen by most players.
Frequently set parameters
How to set the exercises with the remote control that I see on the diagrams.