
17
Move this point to the baseline by pressing the North arrow continuously, then move it
to the center of the baseline by pressing the West arrow (left button).
Now you have to save this point by pressing the Program ON key, this way you have
saved this point.
Now you have to connect the machine to the remote control by pressing the Start/Stop
button. You will see that the ball is shot to the baseline. Whether this happens exactly
depends on the speed and at what height the balls fly over the net. The third point is
the position of the machine. (In front of the baseline on this or in front of it).
•
Repeated pressing of the Vertical button calls different programs that set the
throwing of vertically staggered following balls. Repeated pressing of the key calls
three different programs as shown on the display of the remote control. For this
purpose, press 5 for Speed 90 and 5 for Frequency. Up/Down are preset.
•
Repeated pressing of the Horizontal button (it can be pressed 5 times) calls
different programs that set throwing of horizontally staggered following balls.
Repeated pressing of the button calls up four different programs, as shown on the
display of the remote control Set Speed to 100 Frequency to 5 and Up/Down to 13.
Please select the same setting for the Fixed Point (balls) exercises.
•
By pressing the Random key, the machine will randomly throw balls to different
positions until the ball throwing is stopped by pressing the F key (see also Graphic
18 in the Appendix).
•
By repeatedly pressing the Cross key (you can press 6 times and each time the
ball will land either just before the baseline or left/right at the sideline), different
programs are called up that set the throwing of cross played follow up balls.
Pressing the button repeatedly will call up six different programs as shown on the
remote control display. If you want to train cross, it is best to select the speed
(Speed) 90 and as interval (Frequency)
•
Volleyball and Topspin and Back Spin training.
•
The Topspin button is used to transfer a forward spin to the ball. For this, the upper
throwing wheel of the machine must run faster than the lower one. The Backspin
key works the opposite way to Topspin and provides a backward spin that is used
for slice balls.
Basically
: the trajectory of the balls can always be changed by the speed, height of
the balls and the positioning of the machine
Explanation of the remote control
To get to know the remote control and thus the MSV PlayTec better, you can also
operate the LCD remote control at home. You can also remove the thin foil that was
put on to protect the remote control. Please insert the two included batteries.
The display shows you a tennis court half in the illustration shown, where the ball
throws land when you press the individual buttons. The operation and representation
in the display is done by looking at the throwing wheels of the machine.
Содержание PlayTec
Страница 1: ...1 MSV PlayTec Operating Instructions 16 2 2021...
Страница 3: ...3...
Страница 7: ...7...