MST Impact NS5001, Руководство пользователя

Страница: 86 / 118

6.1 Device Management Overview
The ICA Administration Console (v1.4.0 and later) supports the creation of Access Point configuration
templates. A
Site Default template is created at installation and applied to all managed devices. New
templates can be copied from the Site Default and applied to selected devices, and further overrides can
also be applied to individual devices.
Some familiarity with the ICA Administration Console is assumed here. For more information, see the
ICA Administration Console User Manual available from MST.
There are three editors in the ICA Administration Console with relevant settings:
• Configuration > Site Configuration
•
Configuration
>
AP Config Templates
•
Devices
>
Access Points
6.1.1 Site Configuration
This editor contains the option to Set new Access Points as Managed - If checked, all newly discovered
Access Points will be configured according to the Site Default template by the ICA. If disabled, new APs
must either have their management settings configured in the Devices > Access Points editor, or be
configured manually.
6.1.2 AP Config Templates
The ICA is installed with one AP Template: Site Defaults . This is a special AP Template which defines
the settings that new APs will automatically pick up if Set new Access Points as Managed is ticked in
Revision C 86 NS50 User Guide
Centralised Configuration Management