MST Impact NS5001, Руководство пользователя

Страница: 20 / 118

2.1 Installation Types and Coverage
Wireless network coverage can be described as:
•
Wi-Fi hotspot
— Network coverage is provided in key areas, such as crib areas and refuge bays.
• Full coverage — Seamless wireless coverage by strategically placing NS50 units so their radio fields
overlap.
A NS50 can communicate at wireless distances of 150-300 metres, depending on the geometry and geology
of the mine.
2.2 Power Requirements
The power requirements for a network are unique to each site installation. Determining power requirements
can be complex and is dependent on various factors such as the number of NS50 units, PoE devices,
branches in the network and composite cable lengths.
Note:
A site inspection conducted by a MST System Engineer will help determine the power
requirements for your network.
The NS50 is designed to operate at a wide voltage range, from a minimum of 8VDC up to 54VDC. Each
NS50 in a network can internally step up the incoming voltage to 48VDC in order to supply power to its
connected PoE devices. The NS50 needs to receive a minimum input of 15VDC to power PoE devices.
48VDC power supplies are used for large networks to maximise the distance between power supplies.
For smaller networks of 1-2 nodes, it is recommended that a lower voltage 24VDC power supply is used.
2.3 Choosing Antennas
Antennas are connected to each NS50 to provide wireless network coverage. The type of wireless coverage,
surrounding geology, tunnel topology and stratum type are factors that will determine the choice of
antenna. A minimum of one antenna is required per WAC in a NS50.
Antennas consist of two directional patterns:
• Omnidirectional antennas — radiate equally in all directions for a short range, providing immediate
coverage in an open area.
• Directional antennas — radiate in a specific direction over a longer range. A higher gain antenna
will have a longer range and is more directional. It is important that directional antennas are aligned
properly between NS50 units to ensure continuous coverage between units.
The antenna radiation pattern and polarisation need to be considered to provide suitable wireless coverage
in an area.
Antennas commonly used with the NS50 are shown below.
Revision C 20 NS50 User Guide
Network System Design