MSR-Electronic GmbH
::: Würdinger Str. 27 + 27A ::: 94060 Pocking
::: Germany
P E R F E C T S O L U T I O N S I N
G A S A L A R M
S Y S T E M S
w w w .
m s r - e l e c tr o n i c
. d e
Page 14
| Dec. 2015
Po ly Gar d ® 2 M SC 2 – Dat a Sh eet an d Us er M an u al
Specifications subject to change without notice
PolyGard® is a registered trademark of MSR-Electronic GmbH
NOTES AND GENERAL INFORMATION
It is important to read this user manual carefully in order to understand the information and instructions. The PolyGard®2
MSC system may only be used for applications in accordance to the intended use. The appropriate operating and
maintenance instructions and recommendations must be followed.
Due to permanent product developments, MSR-E reserves the right to change specifications without notice. The
information contained herein is based on data considered to be accurate. However, no guarantee or warranty is
expressed or implied concerning the accuracy of these data.
Intended Product Application
The PolyGard®2 MSC system is designed and manufactured for controlling, for saving energy and keeping OSHA air
quality in commercial buildings and manufacturing plants.
Installer’s Responsibilities
It is the installer’s responsibility to ensure that all PolyGard®2 MSC systems are installed in compliance with all national
and local regulations and OSHA requirements. All installation shall be executed only by technicians familiar with proper
installation techniques and with codes, standards and proper safety procedures for control installations and the latest
edition of the National Electrical Code (ANSI/NFPA70).
The equipotential bonding required (also e.g. secondary potential to earth) or grounding measures must be carried out in
accordance with the respective project requirements. It is important to ensure that no ground loops are formed to avoid
unwanted interference in the electronic measuring equipment.
It is also essential to follow strictly all instructions as provided in the user manual.
Maintenance
We recommend checking the PolyGard®2 MSC system regularly. Due to regular maintenance differences in efficiency can
easily be corrected. Re-calibration and replacement of parts can be realised on site by a qualified technician with the
appropriate tools. A separate documentation is available for this. Alternatively the removable Gas Controller can be
returned to MSR-Electronic GmbH for services.
Limited Warranty
MSR-Electronic GmbH warrants the PolyGard®2 MGC system against defects in material or workmanship for a period of
one (1) year beginning from the date of shipment. Should any evidence of defects in material or workmanship occur
during the warranty period, MSR will repair or replace the product at their own discretion, without charge. This warranty
does not apply to units that have been altered, had attempted repair, or been subjected to abuse, accidental or
otherwise. The above warranty is in lieu of all other explicit warranties, obligations or liabilities.
This warranty extends only to the PolyGard®2 MSC system. MSR-Electronic GmbH shall not be liable for any incidental or
consequential damages arising out of or related to the use of the PolyGard®2 MSC systems.
