MSR Electronics GmbH • Mettlenstrasse 6 • CH-8472 Seuzach, Switzerland
Phone +41 52 316 25 55 • [email protected]
• www.msr.ch
• www.datalogger.shop
© MSR Electronics GmbH, 2020-03-12. All rights reserved.
17
Notice:
The local network address IPv4 is required to be able to transmit and display current
measurement data on this PC, transmitted via WiFi, using the web browser available on
the PC and e.g. the
MSR LocalViewer
software (must be downloaded and installed
separately).
The setup settings are transferred to the logger by clicking the "
Write WiFi setup
"
button.
Notice:
clicking on "Read WiFi Setup" will read out the WiFi settings from the
connected logger, excluding the WiFi password.
For system administrators: The MSR145W2D supports a 2.4GHz WiFi (IEEE 802.11 b/g/n) and
dynamic IP address assignment via DHCP server. When using a URL, an additional DNS server
(port 53) is required. Port 9294 (TCP and UDP) is used for data transmission.
TIP regarding the MSR LocalViewer:
A link to the current version of the MSR LocalViewer software can be found in the
download section at
www.msr.ch/en/msr145w2d
After the PC has been launched and the MSR LocalViewer has been started, the
MSR LocalViewer icon in the task bar (right click) must be used to continue operating
the B/W, to close the MSR LocalViewer or to display the page again. A link to the
recorded data in the Explorer can be found there as well ("Open Logs").
