MSR Electronics GmbH • Mettlenstrasse 6 • CH-8472 Seuzach, Switzerland
Phone +41 52 316 25 55 • [email protected]
• www.msr.ch
• www.datalogger.shop
© MSR Electronics GmbH, 2020-03-12. All rights reserved.
11
Notice:
If the logger you are looking for is not listed, this may be for the following reason:
No WiFi connection between the MSR145W2D and the network on which the PC running
the MSR application is located.
-> Please check the WiFi connection logger - router - PC, see above.
-> the wrong IP address may have been selected in the WiFi setup (see above)
2.2. Sending data through an additional WiFi network to a local application
In this option an standalone WiFi network is established – e.g. through a Fritz!Box. Internet
access is not required. To be able to send the current measured values to the local PC
application via an independent network established especially for the measuring task, you must
connect the logger to this wireless local network (WLAN/WiFi). No Internet access is required.
Various local applications are available in the download area at
www.msr.ch/en/msr145w2d
Appendix A4
provides a description of how to set up an independent WiFi connection using as
an example the Fritz!Box 6820 LTE.
Notice:
Before commissioning on the local system, it is helpful to save the current installation files (ZIP
archives) for the MSR PC software and the MSR application on a mobile data storage device in
order to make them available to the PC that you will subsequently use.
Please install the latest version of the MSR application (see above) on your PC (a link to
the MSR website with the latest version can be found in the download section at
www.msr.ch/en/msr145w2d
Please start the application. This will open e.g. the MSR LocalViewer window in your
standard browser.
example 192.168.1.11
