© MSR Electronics GmbH, 2022-02-22. All rights reserved.
15
MSR Electronics GmbH • Mettlenstrasse 6 • CH-8472 Seuzach • Switzerland
Phone. +41 52 316 25 55 • [email protected] • www.msr.ch • www.datalogger.shop
Battery change
To change the battery, carefully remove the 4 screws from the back of the MSR BudgetLine data logger. Open the housing and remove the button battery. Do
not throw the removed battery in the trash, take it to the nearest battery collection point. Insert a new 3.0 V lithium battery (Panasonic CR2032).
After battery replacement, check the power supply:
MSR63 / MSR64: green LED flashes twice.
MSR83 / MSR84 / MSR86: display is normal - Lo Volt is no longer visible.
Close the housing and screw the 4 screws back in. Be careful not to overtighten the screws.
Troubleshooting
If your MSR BudgetLine data logger no longer functions properly, does not respond to the usual inputs or is not recognized when connected to your PC,
rectify the problem by resetting it. To do this, press the START and STOP keys (green and red keys) simultaneously for about 10 seconds.
Contact Us:
We are pleased that you are using our data loggers. If you have any questions, please contact the sales office where you purchased your MSR BudgetLine
data logger. More than 90 MSR sales partners in over 50 countries worldwide are available to provide you with competent advice.
MSR Electronics GmbH
Mettlenstrasse 6
CH-8472 Seuzach, Switzerland
[email protected] • www.msr.ch • www.datalogger.shop
