MSR BudgetLine MSR63, Руководство пользователя, Страница: 10 / 15

© MSR Electronics GmbH, 2022-02-22. All rights reserved. 10
MSR Electronics GmbH • Mettlenstrasse 6 • CH-8472 Seuzach • Switzerland
Phone. +41 52 316 25 55 • info@msr.ch • www.msr.ch • www.datalogger.shop
Precautions for Sender

Store the data logger in a cool and dry place.
 Don’texpose the data logger to direct sunlight and avoid condensation forming inside the unit.

A little pre-cooling is advisable in case of lower temperature application.
 Don’t use the data logger if START is not shown on the display or if the LED is not ON after pressing the START button for 5 seconds.
Waiting to START
Press START button continuously
for 5 seconds to start the logger.
Logger is STARTED
Logger is waiting till
delay start time is completed.
Logger is in recording mode
 «Lo VOLT» on display / yellow LED flashes indicates low battery. Avoid using the data logger without battery replacement.
 Record the complete details (serial number of data logger, start data & time) prior to starting the logger.

Place the data logger as close to the application as possible.
 Never allow the data logger to remain loose, especially during transit.

Frequent rattling may reset the logger.

Clearly mark the box containing the loggers so that it is easily identified at the end of the measurement period