MSR ELECTRONIC Intec Controls PolyGard 2 DGC6, Руководство пользователя

Страница: 7 / 12

Representation of measured values:
The measured values are shown in the Integer format with a factor of 1, 10, 100 or 1000.
The factor depends on the respective measuring range and is used as follows:
Measuring range Factor
1–9 1000
10–99 100
100–999 10
Ab 1000 1
If the value is below -16385, it is an error message and should be considered as a hexadecimal value
in order to break the errors down.
3.3 Average value of digital sensors – sensor addr. 1–96, Modbus register addr. 3001–3096
3.4 Average value of analog sensors – sensor addr. 1–32, Modbus register addr. 4001–4032
Figure 4: Average value of analog sensors – sensor addr. 1–32, Modbus register addr. 4001–4032
3.5 Measuring range of digital sensors– sensor addr. 1–96, Modbus register addr. 5001–5096
3.6 Measuring range of analog sensors – sensor addr. 1–32, Modbus register addr. 6001–6032
Figure 5: Measuring range of analog sensors – sensor addr. 1–32, Modbus register addr. 6001–6032
INTEC Controls | 12700 Stowe Drive, Suite 100, Poway, CA 92064 | Ph: (858) 578.7887 & (888) GO.INTEC | inteccontrols.com
Specifications subject to change without notice. | GA_GC06_Modbus_supplement_E, 2022-04-05 | USA 221209 | Page 7 of 12
DGC6 Modbus Supplement – UserManual