mspa A081008, Руководство пользователя, Страница: 7 / 14

7
f) As previously outlined, test spa’s GFCI plug.
g) Inflate the spa tub by pressing the “bubble” button
Attention: Do not over inflate.
Press the “bubble “ button to shut off the bubble function when the spa is properly inflated.
h)
Remove the inflation and Screw the valve tight
i) Remove the inflation hose from the control panel and screw the valve tight
j) Screw the filter cartridge onto the water inlet on the spa wall by turning it clockwise.
k) Fill the Spa
Using a garden hose to fill the Spa at least to the water level printed on the Spa wall.
Warning: make sure the power pack is not plugged in before filling water into the SPA.
Note, for B-110 and B-140
(l) Place the Cover onto the Spa, fasten the zipper and lock the cover to the spa by using the digital lock in
the accessory pack
Note, for B-110 and B-140
How to change the combination of digital lock:
1) Original combination is set as 000
2) Push release button (a) in the direction of the arrow
shown and the lock will be released.
3) Set your desired combination by move the number wheel.
Please do not forget your new combination.
4) Insert back the steel cable to its end in the direction of the arrow.
The new combination is ready for use.
water line
(e)
(f) (g)
(h)
(j)
(k)
(l)
(a)
(b)
(c)
(1)
(2) (3)