mspa A081008, Руководство пользователя, Страница: 11 / 14

11
Spa Repair
If the Spa is torn or punctured use the provided Repair Patch. Dry the area to be repaired. apply the glue in
the accessory bag to the repair patch and then attach it onto the damaged area. Smooth the surface to
remove any air bubbles. A secure unnoticeable repair can usually be made.
Spa Storage
Make sure all water is drained from the Spa and control box. This is essential to extend the life of the spa.
We recommend the use of a wet/dry vacuum to blow out or suck up water from the Spa pipes and Pump
lines. Remove the Filter Cartridge. It is recommended you store the spa in its original package in a warm
dry place.
NOTE: Plastic becomes brittle and susceptible to breakage when exposed to subzero temperatures. Freez-
ing can severely damage the Spa. Improper winterization of your Spa may void your warranty.
TROUBLESHOOTING
ORPC strives to provide the most trouble-free spas on the market. If you experience any problem whatsoever,
do not hesitate to contact us or our authorized dealer.
Here are some helpful tips to help you to diagnose and rectify some common sources of trouble.
Problems Probable Causes Solutions
Control box does not operate
-Power failure
-GFCI tripped
-GFCI broken
-Check power source
-Reset GFCI/Check if the home fixed wiring too thin
to afford 2300W.
-Call for service if it does not reset.
Control box does not heat properly
-Temperature set too low
-Dirty Filter Cartridge
-Improper water levels
-Heating element failed
-Set to a higher temperature (between 20-40 ć )
-Clean/replace the Filter Cartridge in time
--Add water to specified levels
-Call for service
Bubble Massage System does not work -Pump is too hot
-30-minute auto shut off feature
activated
-Something is wrong with the control
box
-Unplug the Pump. After the Pump has cooled
insert the plug and press the bubble button to
activate
-Press the bubble Button to reactivate
-Call for service if it does not reset
Water Filtration not working -Dirty Filter Cartridge
-Something is wrong with the control
box
-Clean/replace the Filter Cartridge in time
-Call for service if it does not reset
Spa leakage -Spa is torn or punctured -Use provided Repair Patch
Water not clean -Insufficient filtering time
-Dirty Filter Cartridge
-Improper water maintenance
-Increase filtration time
-Clean/replace the Filter Cartridge
-Refer to the chemical manufacturer’s instructions