mspa A081008, Руководство пользователя, Страница: 10 / 14

10
Drainage
1. Turn off all the buttons on the control panel.
2. Connect the hose with the outlet in the inner wall of the spa to drain, and the hose with the inlet to
absorb water.
3. Turn on the filter pump.
4. Tilt the spa will allow the spa to thoroughly drain.
5. Press the filter button once the spa is completely drained.
Maintaining Spa Water
Poor water quality can be extremely hazardous to your health. We recommend you do following things:
A: Clean your filter cartridge at least once a time after it worked continuously for 72~120 hours. The filter
cartridge should be replaced at least once a month depending on use
B: Change water every few days or use appropriate pool chemicals.
All spas require the use of pool chemicals. Please consult your local pool supply retailer for more informa-
tion about chemical maintenance. Pay close attention to the chemical manufacturer’s instructions. Spa
damage resulting from misuse of chemicals and mismanagement of spa water is not covered by the
warranty.
a. Water Balance
We recommend maintain your water pH between 7.2 and 7.8, total alkalinity between 80 and 120ppm and
free chlorine between 3 to 5ppm. Purchase a test kit to test your water chemistry before each use of the
spa, no less than once per week. Low pH will damage to the spa and pump. Damaged resulting from
chemical imbalance is not covered by the warranty.
b. Water Sanitation
Water Sanitation is the responsibility of the spa owner, achieved through the regular and periodic (daily, if
necessary) addition of an approved sanitizer. The sanitizer will chemically control the bacteria and viruses
present in the fill water or introduced during use of the spa.
Cleaning the spa
Detergent residues and dissolved solids from bathing suits and chemicals will gradually accumulate in
the Spa’s water. To clean the Spa, use soap and water then rinse.
NOTE: DO NOT use hard brushes or abrasive cleaners.
INLET
(2)
(3)
OUTLET