Chapter 4
4-18
Keyboard/Mouse/USB Device Wake up From S3, Resume On Ring/PME#
These fields specify whether the system will be awakened from power
saving modes when activity or input signal of the specified hardware
peripheral or component is detected.
Resume On RTC Alarm
This is used to enable or disable the feature of booting up the system on a
scheduled time/date from the soft off (S5) state. Settings:
Enabled
,
Disabled
.
RTC Alarm Date/Hour/Minute/Second
If
Resume On RTC Alarm
is set to
Enabled
, the system will automatically
resume (boot up) on a specific date/hour/minute/second specified in these
fields. Available settings for each item are:
Alarm Date
01 ~ 31
,
Every Day
Alarm Hour
00 ~ 23
Alarm Minute
00 ~ 59
Alarm Second
00 ~ 59
1. You need to install a modem card supporting power on
function for “Resume On Ring” function.
2. In “Keyboard Wake up From S3”, you have two options:
“any key” & “disabled”. Selecting “any key” allows you
to power on the system by pressing any key.
3. In “Mouse Wake up From S3”, you have two options:
“disabled” & “enabled”. Selecting “anabled” allows you
to power on the system by clicking on the mouse.
