manualshive.com logo in svg

MSI MS6243, Руководство пользователя, Страница: 70 / 95

Поделиться
Скачать
MSI MS6243 Скачать руководство пользователя страница 70

BIOS Setup

4-17

Power Management/APM

Setting to 

Enabled 

will activate an Advanced Power Management (APM)

device to enhance Max Saving mode and stop CPU internal clock.  Settings:

Disabled

, 

Enabled

.

Power Button Function

This feature sets the function of the power button. Settings are:

On/Off

The power button functions as normal on/off button.

Suspend

When you press the power button, the computer enters
the suspend/sleep mode, but if the button is pressed for
more than four seconds, the computer is turned off.

Restore On AC/Power Loss

This setting specifies whether your system will reboot after a power failure or
interrupt occurs.  Available settings are:

Power Off

Leaves the computer in the power off state.

Power On

Reboots the computer.

Last State

Restores the system to the status before power failure or
interrupt occurred.

Set Wake Up Events

Press <Enter> to enter the sub-menu and the following screen appears:

Содержание MS6243
































































































Отзывы:

Нет отзывов