manualshive.com logo in svg

MSI MS6243, Руководство пользователя, Страница: 62 / 95

Поделиться
Скачать
MSI MS6243 Скачать руководство пользователя страница 62

BIOS Setup

4-9

1st/2nd/3rd

The items allow you to set the sequence of boot devices where AMIBIOS
attempts to load the operating system.  The settings are:

IDE-0

The system will boot from the first HDD.

IDE-1

The system will boot from the second HDD.

IDE-2

The system will boot from the third HDD.

IDE-3

The system will boot from the fourth HDD.

Floppy

The system will boot from floppy drive.

ARMD-FDD

The system will boot from any ARMD device,
such as LS-120 or ZIP drive, that functions as a
floppy drive.

ARMD-HDD

The system will boot from ARMD device, such as
MO or ZIP drive, that functions as hard disk drive.

CD-ROM

The system will boot from the CD-ROM.

Legacy SCSI

The system will boot from the SCSI.

Legacy NETWORK

The system will boot from the Network drive.

BBS-0

The system will boot from the first BBS (BIOS
Boot Specification) compliant device.

BBS-1

The system will boot from the second BBS (BIOS
Boot Specification) compliant device.

BBS-2

The system will boot from the third BBS (BIOS
Boot Specification) compliant device.

BBS-3

The system will boot from the fourth BBS (BIOS
Boot Specification) compliant device.

Disabled

Disable this sequence.

Try Other Boot Devices

Setting the option to 

Yes

 allows the system to try to boot from other

devices if the system fails to boot from the 1st/2nd/3rd boot device.

Available settings for “1st/2nd/3rd” boot device vary de-
pending on the bootable devices you have installed.  For
example, if you did not install a floppy drive, the setting
“Floppy” does not show up.

Содержание MS6243
































































































Отзывы:

Нет отзывов