MSI MS-9A07 Скачать руководство пользователя страница 46 | Manualshive

Страница: 46 / 76

MSI MS-9A07 Скачать руководство пользователя страница 46

4-2

MS-9A07 Barebone

Entering Setup

Important

Power on the computer and the system will start POST (Power On Self Test) process.
When the message below appears on the screen, press <Del> key to enter Setup.

Press Del to enter SETUP

If the message disappears before you respond and you still wish to enter Setup,
restart the system by turning it OFF and On or pressing the RESET button. You may
also restart the system by simultaneously pressing <Ctrl>, <Alt>, and <Delete> keys.

1. The items under each BIOS category described in this chapter are under

continuous update for better system performance. Therefore, the descrip-
tion may be slightly different from the latest BIOS and should be held for
reference only.

2. Upon boot-up, the 1st line appearing after the memory count is the BIOS

version. It is usually in the format:

A9821IMS V1.0 072308 where:

1st digit refers to BIOS maker as A = AMI, W = AWARD and P = PHOENIX.
2nd - 5th digit refers to the model number.
6th digit refers to the chipset as I = INTEL, A = AMD, N = NVIDIA, V = VIA and
U = ULi.
7th - 8th digit refers to the customer as MS = all standard customers.
V1.0 refers to the BIOS version.
072308 refers to the date this BIOS was released.

«
...
44
45
46
47
48
...
»

Содержание MS-9A07













































































Отзывы:

Нет отзывов