M S-6441 Barebone
2-10
Serial ATA Connectors: SATA1 / SATA2
These connectors are high-speed Serial ATA interface port. Each connector can
connect to one Serial ATA device.
SATA1 / SATA2
Fan Power Connectors: CPU_F1 / SYS_F1
The CPU_F1 (processor fan) and SYS_F1 (system fan) support system cooling fan
with +12V. It supports three-pin head connector. W hen connecting the wire to the
connectors, always take note that the red wire is the positive and should be con-
nected to the +12V, the black wire is Ground and should be connected to GND. The
mainboard has a Super I/O to detect CPU/fab temperature, you must use a specially
designed fan with speed sensor to take advantage of the CPU fan control.
GND
+12V
Sensor
Sensor
+12V
GND
CPU_F1
SYS_F1
Important
Please refer to the recommended CPU fans at processor
’
s official
website or consult the vendors for proper CPU cooling fan.
Содержание Hetis 965 Series
