manualshive.com logo in svg

MSI Dyna-Link 2, Руководство оператора, Страница: 17 / 61

Поделиться
Скачать
MSI Dyna-Link 2 Скачать руководство пользователя страница 17

12    

MSI-7300 Operator’s Manual

2.0 Operation

2.1 Power

To turn on the Power

1. Press 

POWER

. 

• The LCD will show all segments for a display test.
• The software version number will display. 

The 

Dyna-Link 2

 is ready for use. 

2.2 Zero

Takes out small deviations in zero when the 

Dyna-Link 2

 is unloaded. See Section 3.6 

for zeroing (Taring) package or pallet weights.

Note

Note

The tension reading must be stable within the motion window for the 
zero function to work.

1. Press 

ZERO

. 

The display reads 0 (or 0.0 or 0.00, etc). 

The backup memory stores the zero reading, and can restore it even if 
power fails. 

Zero - Rules for Use:

• Works in 

GROSS

 mode or 

NET

 mode. Zeroing while in 

NET

 mode will zero 

the gross tension causing the display to show the negative tare value. 

• The unit must be stable within the motion window, it will not zero until the 

stable annunciator is on. 

• The unit will “remember” that it has a zero request for two seconds. If motion 

clears in that time, it will zero. 

• The unit will accept a zero setting over the full range of the Dyna-Link. Zero 

settings above 4% of full Dyna-Link will subtract from the overall capacity. 

For example, if you zero out 100 lb on a 1000 lb Dyna-Link, the overall 

capacity will reduce to 900 lb plus the allowed over-range amount. 

Содержание Dyna-Link 2






























































Отзывы:

Нет отзывов