
OPERATING THE CENTRIFUGE
22
Users can switch between displaying the speed and RCF during the run by pressing
the SPEED RCF key twice (see Figure 1.5)
Figure 1.5
Note: The operator cannot change the parameters once the centrifuge is in motion.
5.5 Switching the centrifuge on
Having familiarised yourself with the instruction manual, you can set the
programmers that you require load the rotor, shut the lid and press the START key.
5.6 Switching the centrifuge off
When you have completed your centrifugation, please remember to switch the
machine off at the mains switch located on the side of the centrifuge.
RC: 03340
T=60m00s S .
=
indicates that
the parameter
can be changed.