2
INSTALLATION INSTRUCTIONS
M S D
• W W W . M S D P E R F O R M A N C E . C O M • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • F A X ( 9 1 5 ) 8 5 7 - 3 3 4 4
Figure 1 PN 7764 Power Grid Power Module
Figure 2 Power Module Harness
FASTENING SCREW
FOR MAIN POWER FEED
APPLY A SMALL AMOUNT
OF SUPPLIED LOCTITE 242
TO FASTENING SCREW
DISCONNECT
FROM
BATTERY
BEFORE
REMOVING
CAUTION
SEALED
MINI USB &
COVER
CAUTION!
DISCONNECT WIRE
FROM THE BATTERY
BEFORE INSTALLING.
TO
TO B
RED - OUTPUT 1 (12GA)
RED - INPUT 1 (20GA)
YELLOW - OUTPUT 4 (12GA)
YELLOW - INPUT 4 (20GA)
ORANGE - OUTPUT 2 (12GA)
ORANGE - INPUT 2 (20GA)
PINK - OUTPUT 3 (12GA)
PINK - INPUT 3 (20GA)
BROWN - TEMP SENSOR
REFERENCE (GND) (20GA)
WHITE - SENSOR SIGNAL (20GA)
ECT
(ENGINE COOLANT
TEMPERATURE SENSOR)
POWER SUPPLIED
WITH CAN PIGTAIL
(WHEN THE POWER GRID
IS NOT USED)
GROUND
12V
A power wire must be installed to the Power
Module from the positive Battery Terminal
with an Automotive grade wire rated for heat
and fluid resistance.
WIRE SIZE SELECTION GUIDE
Current Rating AMP Minimum Wire Size AWG
80
4
60
6
20
12
