MSC CXC-BT
User Manual
67 / 84
6.4.5 Boot
Feature
Options
Description
Setup Prompt Timeout
1-65535sec
Number of seconds to wait for setup activation key.
65535(0xFFFF) means wait forever.
Bootup NumLock State
On, Off
Select the keyboard NumLock state
Quiet Boot
Enabled,
Disabled
Enables/Disables Quiet Boot option
Fast Boot
Enabled,
Disabled
Enables/Disables boot with initialization of a minimal
set of devices required to launch active boot option.
Has no effect for BBS boot options.
For more information see also Technotes chapter
VGA Support
Auto, EFI Driver If Auto, only install legacy Oprom with legacy OS
and logo would not be shown during post. EFI driver
will still be installed with EFI OS
USB Support
Disabled,
Full
Initial,
Partial
Initial
If Disabled, all USB devices will NOT be available
until after OS boot. If Partial Initial, USB Mass
Storage and specific USB port/device will NOT be
available before OS boot. If Full Initial, all USB
devices will be available in OS and Post.
Note: If disabled, entering Setup will only be
possible by performing a System Reset ( with Reset
Button ) during OS Boot, or by clearing CMOS with
the Clear CMOS Jumper.
PS2 Devices Support
Enabled,
Disabled
If disabled, PS2 devices will be skipped
Network Stack Driver
Support
Enabled,
Disabled
If disabled, Network Stack driver will be skipped
Boot Priority 1
SATA Port 0/1,
USB Port 0-7,
eMMC, SD
Card, LAN,
UEFI LAN,
External
Devices
Define which boot device should have the highest
boot priority
Note: If the connected device has a legacy and uefi
boot path, uefi will be the higher priority. This can be
avoided by filtering UEFI Boot out
Boot Priority 2
SATA Port 0/1,
USB Port 0-7,
eMMC, SD
Card, LAN,
UEFI LAN,
External
Devices
Define which boot device should have the second
highest boot priority
Содержание Avnet COM Express CXC-BT
Страница 10: ...MSC CXC BT User Manual 10 84 2 2 Block diagram...