TAL 114 (L) Rev. 4 - 10090982
ACCESSORIES
INSTALLING THE NOSECUP FOR
ULTRAVUE/ULTRA ELITE FACE-
PIECE
1. Place the nosecup in the facepiece
and position it so its rubber ring
faces toward the plastic retainer
ring.
2. Starting at the
top, stretch and
push the rubber
ring of the nose-
cup under the
plastic retainer
ring of the
speaking diaphragm assembly.
3. Continue stretching the nosecup
ring and work it into place.
4. For Ultra Elite masks only, stretch
the oval opening in the nosecup
around the lip on its component
housing.
INSTALLING NOSECUP FOR
ADVANTAGE 3000/4000 MASKS
ONLY
1. Place nosecup into facepiece with
notch of nosecup facing the bot-
tom of facepiece.
2. Place bottom of nosecup under
facepiece seal.
3. Stretch nosecup over Inhalation
Valve Housing ensuring notch of
nosecup is over tab of inhalation
valve housing.
4. Stretch nosecup around lip on
inhalation valve housing ensuring
nosecup is in place.
SPECTACLE KIT
Spectacle kits are available for the
Ultravue (P/N 454819), Ultra Elite (P/N
804638), and Advantage 3000/4000
(P/N 10029298) Facepieces. The kit
includes the support assembly, a rub-
ber block, and the spectacle frame.
Prescription lenses can be obtained
locally or through MSA.
ADJUSTING THE SPECTACLES
1. To move the spectacles closer to
your face, pull the frame prongs
out of the rubber block.
2. To move the spectacles farther
from your face, push the frame
prongs into the rubber block.
3. To move the
spectacles up or
down, slide the
rubber block up
or down on the
support arms.
25
Visit: www.thesafetyequipmentstore.com Or Email: [email protected] for Sales & Service.
