49
After Use
GB
G1 Integrated SCBA System
(5) When the pressure falls below 15 bar, turn the control
module off by depressing the reset button (green) two
times within approximately one second.
NOTE:
The HUD and voice projection speaker (if equipped) will automatically turn itself OFF,
within 60 seconds after the SCBA has been depressurized. A red LED will flash until the HUD
turns off.
(6) Stow the LGDV in the LGDV retainer when it is not in use.
(7) To remove the carrier and harness, press in on the waist
belt buckle release button.
(8) Disconnect the chest strap buckle (if used).
(9) To loosen the shoulder straps, grasp the pull tabs and
push them out and away from the body.
