MS CX-40, Руководство по эксплуатации самолета

Страница: 4 / 52

Battery Installation & Charging
1. To install batteries: Open the cover of battery case, insert 4 X1.5V, AA batteries,
according to indicated polarity, (batteries not included)
Battery installation should be done under adult supervision only! Do not mix old and
new batteries. Do not mix different types of batteries.
CX40/CX50 DRONE
1.
Remove the battery from its mounting bracket on the bottom of the CX40/CX50
DRONE.
Join the red connector on the battery cord to the red connector on the USB cable.
Charging with computer:
1.
Insert the USB connector jack into any computer USB port
2.
After charging the battery for 60 minutes (CX-50) / 110 minutes (CX-40),
disconnect it from the charger cord.
3.
Return the battery to its mounting bracket on the bottom of the CX40/CX50 DRONE.
Battery charging should be done under adult supervision only! Use only the
included USB charger with this product. Never leave battery unattended
while charging.
After mounting the charged
battery in the bracket on the
bottom of the CX40/CX50
DRONE, connect the red plug
of the battery to the red
socket from the circuit board.
Your CX40/CX50 DRONE in
now charged and ready to fly.
Controller
Battery cover
4 X 1.5V AA
batteries
Battery Charger
Battery mounted in
bracket on bottom