17
Pay attention to the LED of the charging station. Once the settings from the USB flash drive have
been applied successfully, you can recognize this by observing the LED on the charging area. The area
will flash red first and then change to a constant red and blue light after the settings have been
applied. Now remove the USB flash drive and restart your charging station.
To restart the charging station, disconnect the power connection and connect it again after a short
wait.
If the red LED on the charging station stops flashing after restarting the charging station and a short
time to establish the connection, the charging station has successfully established a connection with
your Wifi network.
GSM dongle
Use the SIM card supplied with the GSM dongle to establish an Internet connection with the GSM
dongle.
Please refer to the list of hardware verified by us. A detailed list can be found in the appendix.
Make sure that your charging station is turned off. Connect the GSM dongle to an empty USB port of
your charging station and then connect the charging station to the power supply again.
Use the LEDs on the dongle to see when the GSM dongle has established a connection. This is
indicated by a permanently illuminated LED on the GSM dongle.
Please note that you will need to restart the charging station if you disconnect the GSM dongle
during operation.
