15
Setting up Internet connection
You have three options to connect your charging station to the Internet.
Ethernet
This requires a LAN cable.
Use the cable to connect the charging station to your router. Use the Ethernet input marked in
Figure 1 “Charging station overview” to connect the cable.
Wifi
To use your charging station with your wireless network, you will need a USB flash drive. Please only
use hardware verified by us. A list of verified hardware can be found in the appendix.
Please make sure that the dedicated configuration tool “MS Schippers – Config Tool” is installed on
your computer for configuration of your charging station.
Now connect your USB flash drive to your computer and start the configuration tool. Make sure that
your USB flash drive is detected by your operating system and is available for use.
After starting the configuration tool, the
following window is displayed.
The window offers several settings and
options to set up your charging station
according to your preferences.
First enter your company number in the box
provided.
