MRMC MRMC-2118-00, Быстрый старт

Страница: 8 / 36

Round Rail Quick Start Guide
4
Laying the first track section
1. Lay the first track section on the ground, on its feet.
2. Raise the six middle feet of the track section (three on each rail) and
the two threaded anchor sleeves so they do not touch the ground,
leaving the rail to rest on the four corner feet.
3. Level the track in both length and width directions using a spirit
level, by adjusting the four corner feet of the track. Make sure all
four corner feet are touching the ground (no wobble).
4. Tighten the lock nuts up against the track on the corner feet, being
careful not to change the height.
5. Lower the middle feet until they touch the ground (finger tight
against the ground) and then tighten the lock nuts on them.
Hint
The four corner feet also determine the track height. If you are
laying track on a level floor, try to use the middle of the height
adjustment range so that subsequent sections have some leeway
(in their feet) to cater for any unevenness in the floor.
Lock nut
3
Height
adjustment
bolt
2
4
Middle feet
Anchor sleeve
2
5