MRMC MRMC-2118-00, Быстрый старт

Страница: 14 / 36

Round Rail Quick Start Guide
10
Mounting the rack
1. If your track sections do not yet have the racks mounted on them,
do this now for each track section as follows:
1.1 Loosen all the rack clips on the track section.
1.2 Lay the rack into the brackets on the track, tilted as shown,
making sure that the clips on the track go into the groove on
the rack, just under the teeth.
1.3 Twist the rack to lay flat in the brackets. Do not tighten the
clips yet.
1.4 Repeat steps 1.1 to 1.3 for each track section.
2. In the middle of the track, slide two of the racks together
end-to-end, so that the so that the rack screw holes line up with the
rack mounting brackets. You can insert screws in them to check that
they line up. Do not tighten the screws yet.
1.1
Groove
Teeth
1.2
1.3
1.2
Clip
Rack mounting bracket