Assembly of Support Bracket Mounts
Page 4
mrcool.com
2
Begin the installation process by assembling the support bracket mounts.
1.
Take one of the folded brackets (Component C) and unfold it into an “L” shape, so that it stands upright and
is pointed towards you. Refer to
Fig. 2.1
.
2.
Insert component D into the hole at the base of the rear of component C. Please refer to
Fig 2.2
.
3.
Next, take two bolts (component M8x25 M-A) and place washers (component B) onto them. Then, insert the
bolts with washers into the front and rear slide holes on the top of the base of component C. Next, put
washers (component M-C) on the ends of each bolt and then secure with nuts (component M-D).
DO NOT
overtighten the nuts.
Please refer to
Fig. 2.1.
4.
This completes the assembly of one support bracket mount. Repeat the same process for the second
support bracket mount.
Fig. 2.1
Fig. 2.2
M8 M-D
Component B
M8X25 M-A
Component D
Component C
D8 M-C
