7
5 If the instrument is located on the BMX, the brake device must be
installed on the BMX;
6 Put some materials that can absorb heat conduction medium under the
instrument to prevent overflow or leakage of heat conduction medium;
7 If any heat conduction medium overflows, it must be cleaned;
X. Heat conduction medium
It is recommended to use the heat conduction oil recommended by
the manufacturer. The working capacity and viscosity of the heat
conduction oil which is within the temperature control range of the
equipment can meet the constant temperature process requirements of the
load equipment.
The viscosity of the heat conducting oil must not exceed 50mm2s at
the lowest temperature;
the maximum density of thermal oil cannot be greater than
1kg/dm3s23.
Chapter 2: Connecting Instruments and Equipment, Filling
Thermal Media, and Using
I.
Connection of the power
Warning:
Before connecting, make sure that the supply voltage meets
the requirements in the instrument data sheet! If the damage
