Recirculating cooler
- 9 -
than 25
℃
, the compressor starts to cooling, and the auxiliary display shows
the objective cooling temperature as 15
℃
; when the water temperature is
lower than 15
℃
, the compressor stops to cooling, at the same time the
auxiliary display shows the temperature upper limit as 25
℃
.
Remark: In advanced application mode, it is upper and lower economic
control mode to set 0 as R_CS parameter, 1 as R_CM parameter. Usually
it is not necessary for users to change.
Press Menu key
under working interface, then the auxiliary display
shows T00, and the main display shows setting temperature. After
parameters set, press Enter key
to save and press Menu key
enter into temperature control precision setting, now the auxiliary display
shows T01(temperature control precision), the main display shows the
precision of the temperature difference control, which can be set by Left-shift
key
, Add key
and Reduce key
.
Remark: Units with Start/Stop economic temperature control mode can
not working under single-point high precision temperature control
mode by setting R_CS and R_CM parameter.
3. Tracking control mode:
In this mode, the water temperature in the bath can be controlled via adding
another temperature sensor by configuration of the sensors’ port of the unit.
This temperature sensor can sense the temperature of the environment or
user’s
equipments. Please refer to Part 3.4 for detailed setting method.
Remark: Ordinary chillers are not available of tracking temperature
control mode function, it is optional for customers.
3.3.3 Start/Stop compressor
