5
Avoiding Damage to the Instrument
1. Do not attempt to operate the device if damage is suspected.
2. Protect this unit from physical damage, corrosive agents and extreme
temperatures (direct sunlight, etc.).
3. For proper ventilation and safety concerns, keep at least 10 cm of space
behind the instrument, and at least 5 cm of space on each side.
4. Use high level of precaution against the damages on the unit.
5. Do not operate the unit out of environmental conditions addressed above.
6. Prior to applying any cleaning or decontamination methods other than
manufacturer’s recommendation, users should check with the
manufacturer’s instruction to see if the proposed method will damage the
equipment.
7. When the
PWR-3030
power supply is taken into a cold room environment,
the unit can be operated immediately. However, when the
PWR-3030
power supply is removed from the cold room environment, let the unit
equilibrate to room temperature for a minimum of 2 hours before using it
.
Equipment Operation
Follow the guidelines below to ensure safe operation of the unit:
1. Check the displayed figures to see if the unit is functioning correctly before
using this unit.
2. NEVER access dangerous chemicals or other materials to prevent possible
hazard of explosion and damage.
3. Do not operate the unit without lids or covers to prevent possible hazards.
4. A temporary conductivity caused by condensation might occur even though
this series is rated Pollution Degree 2 in accordance with IEC 664.
Symbols
The symbols used on
PWR-3030
Power Supply are explained below.
Indicates an area where a potential shock hazard may exist.
Consult the manual to avoid possible personal injury or instrument
damage.
Indicates disposal instruction.
DO NOT
throw this unit into a municipal trash bin when this unit has
reached the end of its lifetime. To ensure utmost protection of the
global environment and minimize pollution, please recycle this unit.
Max. voltage: 300V
Max. Current: 3000mA
Max. Watt: 300W
